Testing Facility
1. Sand Testing and Analysis:
- AFS Analysis
- Permeability Testing
- Compressive Strength Testing
- Clay Content Test
2. Spectrometer Testing:
- Model: Spectromaxx
- Base Materials: Fe & Ni
- Certified Reference Materials in:
- Low Alloy Steel
- Martensitic Steel
- Austenitic Stainless Steel
- Duplex Steel
- Nickel Base Alloy
3. Chemical Analysis:
- Complete raw material analysis through wet method testing.
4. PMI Testing:
- Comprehensive material identification and testing.
5. Mechanical Testing:
- Universal Testing Machine (UTM): 200 KN capacity
- Electronic Extensometer: 0.2% proof stress testing
6. Impact Testing:
- Capacity: Up to 300 J
- Testing Temperature:Ranges from 20°C to -196°C
7. Hardness Testing:
- Rockwell Hardness Tester
- Poldi Hardness Tester
- Brinell Hardness Tester
8. Microstructure Examination:
- Ferrite Testing: As per ASTM E 562
- Microstructure Examination: As per ASTM A 923
9. Corrosion Testing:
- Conducted according to ASTM standards:
- ASTM A262: Practices A, B, C, E, & F, etc
- Pitting Corrosion Test: ASTM G 48 Method A, E
- Crevice Corrosion: ASTM G48 Method B
10. Radiation Check:
- Radiation Meter: Ensures no radioactive contamination in materials.
11. In-House Non-Destructive Testing
- Liquid Penetrant Testing: Solvent & water washable methods
- Magnetic Particle Testing (Wet Fluorescent Method):Prod & central conductor type
- Radiography Testing:Ir 192 & Co 60
- Ultrasonic Testing
- Manpower:Level II certified in all NDT methods
- NDT Procedures: RT, UT, MPT, LPT, and VT as per EN & ASNT Level III standards
Additional Approvals:
- Welders qualified per ASME Section IX & BS EN ISO 15614-1
- Impact Testing:Certified for testing at -196°C
- Heat Treatment:Qualified